Jiangyin Dingbo Technology CO., Ltd.
Jiangyin Dingbo Technology Co.Ltd. Professional in manufacturing roll forming machine
Add to Cart
Metal Steel Cable Ladder Manufacturing Machine With Cutting Cr12 Blade
Main features
Cable tray roll forming machine is flexible to install, its good performance combined with a visually appealing profile in the electrical industry. For general use indoor, with a clean looking finish, the tray is offered in pre-galvanized steel, however,if use outdoor that need the extra corrosion protection,hot dip galvanized after fabrication cable trays are available.
Working flow
De-coiler --- leveling machine --- Servo feeding machine --- Punching press/cutting --- Feeding frame --- Forming machine --- Collection table
Technical parameters
Feeding material
| 1 | Rolling Thickness | 0.7--2.0mm |
| 2 | Feeding Width | 200~920mm |
| 3 | Yield Strength | ≤ 235Mpa or 550Mpa |
Decoiler
| 1 | Load Capacity | ≤5T |
| 2 | Coil Inner-Diameter | ≤508mm |
| 3 | Coil Outer-Diameter | ≤1250mm |
Leveling device
| 1 | Leveling Roller Material: | GCr15, HRC55-62 |
| 2 | Roller | 7 |
Punching device
| 1 | Normal Force | 400KN |
| 2 | Journey time | 10 to 15m/min |
| 3 | Material of punching dies | Cr12, HRC55-62 |
Roll forming machine
| 1 | Forming Steps | 16 steps |
| 2 | Line Speed | 10 to 15m/min |
| 3 | Stand | Independent stand structure (raft structure) |
| 4 | Drive | Independent motor and moved by chain |
| 5 | Material of Roller | 45# steel polished and coated with chrome HRC55-60° |
| 6 | Shaft Diameter | 80mm |
| 7 | Shaft material | high grade No.45 steel after treatment |
| 8 | Main Motor Power | About22KW |
| 9 | Voltage | 380V/50HZ/Three Phase |
Cutting deive
| 1 | Cutting Die | Cr12, HRC58-62 |
| 2 | Tolerance | ±2mm |
| 3 | Valve | Adopts Italy Atos |
Control system
| 1 | Function | Control the whole line manually and automatically |
| 2 | Structure | PLC Frequency Control System with touch screen |
Machine picture
Profile drawing
Packaging & Delivery
FAQ
1. Does one machine can only produce one size?
Not exactly, it depends on which profile the customer want to produce.
2.Do you have after-sales technical support?
Yes,we are happy to give advice and also have skilled technicians available to maintain the machine overseas to customers’ workshop if needed.
3. You are trading company or factory?
We are Manufacturer, and we export our machine by ourselves.
4.How long the machine could be made?
Normally speaking, high precision roll forming machine could be made out with 40 working days.If you need machines in hurry, we can make it for you less than a month.
5. Do you provide customized?
Sure, we can design the machine according to the requirement and profile drawing you provide. Our engineers can offer the best professional solution to our worldwide clients.
6. May we visit your factory?
Sure,Warmly welcome to our factory at any time.
7.How to visit your factory?
By high speed train from Shanghai to East Wuxi (Wuxi Dong station), half an hour.
8.What's the warranty period?
12 months warranty period, starting from the date of the successful installation and commissioning of the equipments at the Buyer’s Installation site.
9.Can we arrange shipment?
Yes, sure, we can arrange shipment for our customers and provide door-to-door service.
Best Regards
Andy Yang
Director
Mobile/Wechat/Skype:0086 139 2126 2246