Jiangyin Dingbo Technology CO., Ltd.
Jiangyin Dingbo Technology Co.Ltd. Professional in manufacturing roll forming machine
Add to Cart
7.5kw Main Motor Power Downspout Roll Forming Machine Controlled by PLC
Downspout (Down pipe) is a pipe for conveying rain water from a roof or gutter to the ground, also referred to as Leaderpipe, Downpipe, or Drainspout. The downspouts are more and more widely applied in rain water storage solution. Downspout disconnection (sometimes called roof leader disconnection) represents a cost-effective on-site alternative for reducing the volume and cost of stormwater that requires public management. Runoff from residential rooftops is collected by eaves troughs, which are installed along the edge of the roofline. Water collected in the eaves trough is conveyed to ground level by one or more downspouts. Downspouts may then connect directly into the storm sewer system into a combined storm and sanitary sewer system. Disconnecting downspouts brings a number of economic and environmental benefits to the municipality and the homeowner Our roll forming line of downspout machines run copper, steel, or aluminum. These are also ideal for piping for the HVAC industry for small sizes ductwork.
| Name | Downspout and Rain Gutter Roll Forming Machine |
| Appearance Size | 5600*1400*1300mm |
| Weight | 2-6Ton |
| Roller Material | High grade 45H forged steel |
| Blade Material | Cr12 With ppolished,heated and quenched HRC60-62℃ |
| Chrome Coating | Coated with 0.05 mm hard chrom |
| Control System | PLC control Siemens Brand |
| Main Motor Power | 5.5kw Siemens Brand |
| Hydraulic Power | 3-7.5ke |
| Roller Station | 13-18Rollers |
| Chain Material | High grede 45H steel |
| Forming Speed | 15-23m/min |
| Thickness | 0.2-0.8mm |
| Cutting | Hydraulic cutting |
| Rack Material | Complete welded structure of A3 steel plate |
| Frame Material | Welded with 350H steel |
| Machine forming type | Sigle station with chain transmisson |
| Viltage | 380V50H3Pha |
Technological process of downpipe roll forming machine:
Uncoiling---Feeding---Leveling---Punching----Roll forming---Cutting---Products collecting
Technical parameters:
Steel thickness: 0.5-0.8mm
Forming speed: 8-10m/min
Roller stands: 20 stand
Roller material: 45# steel, coated with chrome
Main motor power: 3kw
Hydraulic cutting power: 7.5kw
Hydraulic pressure: 12Mpa
Power supply: 380V 50HZ 3 phase
Tolerance: 1.5mm
Material of cutting: Cr12
Control system: PLC with touch screen
Machine net weight: 10T