Jiangyin Dingbo Technology CO., Ltd.
Jiangyin Dingbo Technology Co.Ltd. Professional in manufacturing roll forming machine
Add to Cart
| 1 | Processing material: | Aluminum plating zinc/galvanized steel/colored steel coil |
| 2 | Material thickness: | 1.5-3.5mm |
| 3 | Capacity: | 10-20m/min |
| 4 | The weight: | 2-8 ton |
| 5 | Main motor power: | 15kw |
| 6 | Pump power: | 5.5kw |
| 7 | Shaft diameter: | 80mm |
| 8 | Forming steps: | 9+13+2 steps |
| 9 | Roller material: | bearing steel |
| 11 | Main frame: | 400H steel |
| 12 | Control system: | PLC computer control with inverter |
| 13 | Power supply: | 380V, 3 Phase, 60Hz(as requirement) |
| 14 | size(Length*Width*Height): | 1.5*0.5*0.7m-12*5.3*2.5m |
| 15 | Warranty | 14 months |
Application of CZ Purlin Roll Forming Machine
In the steel industry, different purlin structural shapes were given representative names to facilitate the easy description of drawings and documents. Channel sections, with or without flange stiffeners, are usually referenced as C purlin; The channel section without flange stiffeners is also called U purlin. Point symmetry with a shape similar to the letter Z is called a Z purlin.
Automatic change CZ purlin roll forming machine can produce any specifications of the C&Z profiles (during the width 100~300), no need changing any parts of the machine. It takes one hour to change C shape to Z shape.
CZ Purlin Roll Forming Machine Technical parameters
| Items | Specifications | |
| Material of coil | Purlin Width | 100mm-300mm |
| Purlin Height | 40-80mm | |
| Material Thickness | 1.5-3mm | |
| Uncoiler | 5 tons manual | |
| Leveling | 7Rollers | 3upper rollers, 4 lower rollers |
| Hydraulic system | Hydraulic Power | 5.5kw |
| Punching | Hydraulic pre-punching | |
| Punching mould material | Cr12Mov | |
| Cutting | Hydraulic pre-cutting | |
| Blade Material | Cr12Mov | |
| Tolerance | +-1.5mm | |
| Forming system | Rolling Speed | 10-15m/min |
| Roller Stations | 16 stations | |
| Roller Material | Gcr15 quenched, hardness 55-58° | |
| Shaft material | 45#steel | |
| Main Motor Power | 18.5kw | |
| Way Of Drive | chain | |
| Electrical control system | Electric Source | 380V, 50HZ,3 phase(customized) |
| PLC Control System | Panasonic |
Main Components
| No. | Name | Qty |
| 1 | Manual uncoiler | 1 |
| 2 | Punching machine | 1 |
| 2 | Main roll forming machine | 1 |
| 3 | PLC Control box | 1 |
| 4 | Hydraulic pump station | 1 |
| 5 | Output table | 2 |
Profile drawing to design of CZ Purlin Roll Forming Machine
Machine pics
Application photos
c purlin or z purlin is a horizontal beam or bar to provide structural support in buildings. Our purlin roll former can produce purlins of different sizes. C Z purlin Roll Forming Machine is also called Interchangeable purlin roll forming machine or z purlin making machine. In steel construction, the term purlin typically refers to roof framing members that span parallel to the building eave and support the roof decking or sheeting. The steel of c purlins are in turn supported by rafters or walls. So pre-punched purlins are quick to install and suitable for both insulated and uninsulated roofs and walls. The thickness and height of the purlin selected depend on span length and loads.